Zobacz co się zmieniło w SheetCamie – bądź na bieżąco!

Ostatnia aktualizacja: 09/8/2021

Wersje Stabilne

Wersje Deweloperskie

Najnowsza wersja: 7.0.15 (Sierpień 2021)

Co się zmieniło?

Naprawiono: Edycja operacji cięcia strumieniem powoduje awarię
Dodano: Włącz/wyłącz zablokowane części w oknie części.
Naprawiono: Sporadyczne awarie podczas zamykania.
Naprawiono: Podejścia nie wyzwalają zdarzeń post OnOffset.
Naprawiono: W polu wyboru trybu konturu można było wybrać kontury z duplikatu.
Naprawiono: Niektóre pola wprowadzania liczb ignorowały klawisze i .
Dodano: publikuj niestandardowe opcje w raporcie o pracy
Naprawiono: Okno dialogowe wiercenia czasami pokazuje opcje wiercenia obrotowego, gdy wybrane jest narzędzie jet
Naprawiono: środkowy przycisk + kółko myszy obraca część w trybie zagnieżdżania
Naprawiono: brak przycisku „punkt na pozycji” w trybie „pojedynczego ruchu” w oknie ruchu.
Naprawiono: okno dialogowe w trybie „Wiele ruchów” bez nagłówków kolumn i pokazujące tylko jedną kolumnę
Naprawiono: Post Zainstaluj uszkadza znaki Unicode.
Naprawiono: Podświetlanie części nie działa w opcjach zadania->zagnieżdżanie, jeśli jesteś w trybie zagnieżdżania.
Dodano: opcję skali części. Zajrzyj do zagnieżdżonego menu prawego przycisku myszy lub menu prawego przycisku myszy na drzewie części.
Dodano: Obliczanie czasu pracy na dole ekranu
Naprawiono: wyskakujące okienko ostrzeżeń operacji pokazujące zbyt wiele wiadomości
Zmieniono: Okno dialogowe raportu o zadaniu zapamiętuje teraz swoją pozycję i rozmiar

..::ENGLISH VERSION::..

V7.0.15
Fixed: Editing a jet cutting operation causes a crash

V7.0.14
Added: Enable/disable locked parts in part window.
Fixed: Occasional crash when closing.
Fixed: Leadins do not trigger OnOffset post events.
Fixed: In contour mode box select allowed you to select contours from a duplicate.
Fixed: Some number input boxes ignored the and keys.
Added: post custom options to job report
Fixed: Drill dialog sometimes showing rotary drilling options when a jet tool is selected
Fixed: Centre button + mouse wheel rotates a part in nesting mode
Fixed: 'point at position' button missing in 'single move' mode in the move dialog.
Fixed: Move dialog 'Multiple move' mode missing column headers and only showing one column
Fixed: Install post corrupts Unicode characters.
Fixed: Part highlighting does not work in job options->nesting if you are in nesting mode.
Added: Part scale option. Look in nesting right-click menu or part tree right-click menu.
Added: Job time calculation at the bottom of the screen
Fixed: Operation warnings popup showing too many messages
Changed: Job report dialog now remembers it’s position and size

Wcześniejsze wersje:

7.0.13 (Maj 2021)
Co się zmieniło?
Naprawiono generowanie ścieżek narzędzia
Eng: Fixed: Not generating toolpaths correctly
v7.0.12 (Maj 2021)
Fixed: Plasma should start at the end of the tab if the start point is on a tab
Fixed: Crash if minimum segments for arc fitting is less than 4
Fixed: Incorrect tool paths when ramping open paths with 'reverse open paths' selected
Changed: Tools now have path rules
v7.0.11 (Maj 2021)
Fixed: Sim showing a ramp down to the first cut when 'no move to safe z' is used
Changed: Some changes to try to work around the green stripes issue on some computers.
Fixed: Entering text coordinates in text plugin did not work
Fixed: Shape plugin missing X,Y coordinates
Added: Shape plugin now has 'add to new part' option
Fixed: Error generating tool paths when ramping out of a tab that is very close to the end of the cut path
Fixed: Path rule sets don’t always stay deleted when you delete multiple rule sets
Added: Shape library now has 'add to new part' option
Fixed: Missing coolant option in drilling operation
Fixed: Random crashing (at least one of the crashing bugs anyway)
Changed: SVG now has an option for 90DPI or 96DPI
Fixed: Changes in tab width not affecting already placed tabs
Fixed: random warning that you will disable tstart point optimisation in start point mode
Fixed: Many stability fixes to start point options in pinned mode
Fixed: 'Reverse cut direction' in start point right-click menu can put leadin on wrong side or affect other cut paths.
Fixed: SVG showing hidden lines
Fixed: Creating a new part leaves the old part selected
Fixed: DNC tool not automatically sending data
V7.0.10 (Kwiecień 2021)
Fixed: In Edit contour 'move to part' does not work
Fixed: A few more translation issues
Fixed: More arc matching problems
Archiwum
V7.0.9

Fixed: Corner sharpening in pocketing missing some corners
Fixed: Ugly background on some of the sliders

V7.0.8

Fixed: Crashing on close on some computers (for real this time!)
Fixed: Occasional crashing on loading a drawing when in start point or action tab mode

V7.0.7

Fixed: Crashing on close on some computers
Fixed: Input boxes not allowing you to set the caret position with the mouse

V7.0.6

Fixed: Names from menus such as move to layer end up in shortcut keys.
Changed: move to layer etc added to shortcut keys. These pop up a sub menu with the layer/part selections.
Fixed: Loading a part can leave other parts selected
Changed: Sliders such as corner threshold now show the value
Fixed: Arc matching making huge circles (hopefuly I actually got it this time)
Changed: Better circle detection when arc matching.
Fixed: Input boxes not selecting when you click on them
Added: 'Set part position' option in nesting (sets focus to part position X box)
Fixed: Shape plugin missing translation in dropdown boxes
Fixed: Not loading wxWidgets translation files
Fixed: Not translating units

V7.0.5

Added: Drawing date to part properties
Changed: Manually edited names are now auto detected in older tool files.
Fixed: Occasional erroneous large circles when arc matching.
Changed: SVG now supports CSS (Corel SVG files use CSS)
Fixed: Quick load plugin selecting the wrong parts
Fixed: Shape names missing from translation

V7.0.4

Fixed: Tool names always being overwritten

V7.0.3

Fixed: Operation names not showing tool number
Fixed: Operations from older jobs not updating their names

V7.0.2

Fixed: Crash after opening operation table from operation right-click menu
Fixed: Right-click menus not being translated
Fixed: Missing wx translation files
Fixed: Machine and work not displaying when SheetCam is started
Changed: If you cancel adding a rule set, the first rule set is shown rather than disabling the rule list.
Fixed: Grid colour selector always defaulting to black instead of your selected colour
Added: In nesting + mouse wheel will rotate the part

V7.0.1

Fixed: Rotary plugin options not laying out correctly

V7.0.0

Changed: When loading older tool sets you are now asked if you want to keep the tool names
Fixed: Update dialog not sizing correctly
Fixed: Peripheral feed arte rule generating incorrect feed rates.
Removed: Depth of cut in peripheral feed rate rule
Fixed: Editing rules could cause a crash if you cycle between different rules very quickly.

V6.9.28

Fixed: Incorrect tool paths if you move/copy a contour to/from a part with both X and Y mirrored.
Fixed: Peripheral feed rate generating incorrect feed rates for inside arcs.
Fixed: Path rules dialog not highlighting selected rule
Fixed: Path rule dialog allows you to select a blank rule.
Changed: Part tree selection now allows shift-select and ctrl-select

V6.9.27

Fixed: Tools list scrolling horizontally instead of vertically
Fixed: Layout problems in some windows for example plate marker tool.
Fixed: Plate marker tool showing leadin/leadout options.
Fixed: GCode operation not saving/loading code snippets correctly.
Fixed: Help buttons not working
Fixed: Help appearing under main window
Fixed: Many operation and tool dialogs missing their help buttons

V6.9.26

Fixed: G-code operation does not save the code snippet selection
Fixed: Operation table does not show
Changed: Updated OEM installer config
Fixed: Load default toolset and save default toolset icons swapped
Fixed: Tool and operation tables did not select the cell when you right-click

V6.9.25

Fixed: Check boxes missing when using Wine
Changed: Renamed a lot of fonts
Fixed: Occasional crash on close
Fixed: Incorrect cut distance reported
Changed: Plunge distance reported separately to cut distance
Fixed: Drill operation showing start depth, cut depth and peck depth when using plasma tool
Changed: A large number of internal changes to shape plugin to try to prevent crashes.
Added: Text plugin now allows you to edit the text after placing it.
Changed: Code editor now shows the bottom sash properly. It also remembers it’s size.
Fixed: Wine detection sometimes incorrect
Fixed: SVG rectangle rounded corners not working if the Y radius is missing
Fixed: SHX fonts with arcs not showing correctly is compression is not 100%
Fixed: 'a backup has been found' Sometimes showing when it should not.
Added: Tabs mode now shows the number of contours with tabs. Useful to check if you have tabbed all contours.

V6.9.24

Fixed: Zigzag pocket could miss some areas on very complex geometry
Changed: More zigzag pocket speed optimisation
Fixed: Shapes are not editable after saving/loading the job.
Fixed: Shape hint bitmaps missing
Changed: shape 'Create bitmap' button is normally hidden. Enable it in Options->plugin options if needed.
Fixed: shape 'Create bitmap' button not always creating a valid bitmap.
Changed: Shape window now remembers it’s size
Added: Shape tree allows double click to select
Changed: You need to click 'Add to current part' to add the shape.
Changed: Quick load window now remembers it’s size
Added: New shapes (Thanks David)
Fixed: Operation names not updating if you change a tool name

V6.9.23

Fixed: Code snippets changing their names to 'Code, ERROR'
Fixed: Changing the tool name in the tools window does not always work.

V6.9.22

Fixed: Start points losing their index numbers when you load a job. Also causes crashing if you enter nesting mode.
Changed: The old zigzag pocket operation is now replaced with the new zigzag pocket algorithm. NOTE: Zigzag pocket2 operations now no longer work.
Fixed: Coolant randomly appearing in the wrong place in pocket operations when you change the type.

V6.9.21

Fixed: Displaying number of pierces even if you are not jet cutting.
Fixed: Path rules window does not expand correctly.
Fixed: Redundant 'Pocket' tab in operation table
Fixed: Operation table allows you to edit operation name
Changed: Tool names can be individually selected as auto named or manually named
Fixed: Drill operation shows layer and tool options twice if a jet tool is selected.
Fixed: Negative start point overcut overrides ignored if the operation’s overcut is zero or positive
Fixed: Copying contours from a mirrored part to a non mirrored part reverses the cut side.
Added: Operation names can be edited in the operations window and operation table.
Added: Tool names can be edited in the tools window.

V6.9.20

Fixed: Tool and operation tables not showing custom values.

V6.9.19

Fixed: Plasma operation editor using the wrong values.

V6.9.18

Fixed: Occasional layout issues in tool and operation dialogs.
Fixed: Tool names sometimes blank or with extra tool number.
Fixed: Tool table does not let you edit some values such as feed rate
Fixed: Tool/operation table missing a scroll bar
Fixed: Tool/Operation table sometimes showing edit boxes too small
Fixed: Tool paths sometimes not being generated correctly when ramping with tabs in a confined space.
Fixed: Move to layer sometimes causing a crash
Fixed: Post documentation window does not show.
Fixed: Laser plugin generating completely incorrect paths.
Changed: Path rules inside a wiggle pierce will be applied at the end of the pierce.

V6.9.17

Fixed: Unable to edit tool names.
Added: New zigzag pocketing algorithm 'Zigzag pocket 2′. Best suited to high step overs.
Fixed: Start point options popup interferes with quick cut sequence
Fixed: Start point options popup sometimes changes start point when you have the mouse over it.
Changed: Start point options can be pinned as a popup or if left unpinned operates as before.

V6.9.16

Fixed: Crashing when 'Automatically generate name' is selected in tool dialog after changing the tool type.
Fixed: DXF Z extrusion of a block should reflect it
Fixed: Crash if just a space is entered in a number box
Fixed: Occasional incorrect tool paths when ramping an open contour.
Changed: Start point options popup is now easier to use.
Removed: Start point properties dialog (use start point options popup instead).
Fixed: Very slow moving large groups of parts in nesting mode
Fixed: Print showing background as black instead of white
Fixed: 'Start at the centre of holes' option missing from plasma operation and start points
Fixed: Post processor dialog status window is too small

V6.9.15

Fixed: Copy/move outlines to another part could cause corrupted outlines.
Changed: Action points and start points now always show the point properties in a popup window.
Fixed: Some layout issues in tool and operation dialogs.
Fixed: Part window not showing lock icon correctly.
Fixed: DXF not reflecting blocks correctly when a negative Z scale is used
Fixed: Graphics in tool and operation dialogs too large and blurred.
Fixed: Hot tracking on operation window makes warning text unreadable.
Fixed: Occasional incorrect tool paths when ramping an open contour.
Fixed: Installer now installs .po translation files.

V6.9.14

Changed: Wire plugin now does not reverse direction of cut to get to exit point
Added: Drawing import options now allows you to enter a part position.
Added: Cut distance and part information in status box.
Changed: Improved OpenGL compatibility

V6.9.13

Fixed: SVG ignoring shapes
Fixed: OpenGl display not drawing correctly at startup on some computers
Added: Search in quick load plugin
Fixed: 'Include sub dirs' not working correctly if the sub directories contain files of the same name
Added: 'Cut length' in status box
Added: Ability to turn off cut preview in simulation options
Fixed: Large memory leak which could cause crashing on close

V6.9.12

Fixed: Operation panel not drawing correctly on startup.
Fixed: Machine and work not showing at startup

V6.9.11

Fixed: OpenGL display not showing (oops!)

V6.9.10

Fixed? Crashing on close
Fixed? Stripes on OpenGl

V6.9.9

Fixed: SVG not scaling correctly when a view box is specified

V6.9.8

Fixed: Several OpenGL errors which could be causing the green stripes seen by some. May also fix some crashing issues?
Fixed: Arc matching sometimes distorting arcs
Fixed: SVG distorting some drawings
Fixed: SVG locking up with some Corel SVG files
Fixed: Missing icons for SheetCam files
Fixed: New tool and new operation right-click menus not working.

V6.9.7

Fixed: Missing 'd' shortcut to duplicate in nesting
Fixed: Missing shortcuts for tools and operations
Fixed: Quickload throwing an error if you double click on a drawing name
Fixed: Right click on a toolbar bringing up the wrong options page
Fixed: Mach3 plugin missing
Fixed: Start point mode stops working if you select a different part
Fixed? Random crashing on close

V6.9.6

Changed: Action points now add their code snippet’s comments to the g-code file.
Fixed: Menus and tree not updating correctly when shortcut keys are changed.
Fixed: Crashing on close

V6.9.5

Comments in rule code snippets are now output in g-code
Edit contours now allows you to move/copy contours to other parts.
Added option for square corners when milling/routing contours (cut path tab).
Changed: Operations window is now available in nesting mode. It is only disabled if multiple parts are selected.

V6.9.4

Fixed SVG locking up when importing arcs.

V6.9.3

Fixed big icons in menus

V6.9.2

Added: Preview mode in simulation which shows the plasma cut parts.
Fixed a number of crashes

V6.9.1

Built using WX-3 and VS2019

V6.1.74

Fixed: Occasionally losing 'Automatically generate name' option when loading tool sets.

V6.1.73

Fixed: Manually entered tool names getting overwriten. 'Automatically generate name' is back!

V6.1.72

Fixed: Tabs disappearing when you edit an operation with tabs.
Fixed: Feed rate overrides not working correctly in job report
Fixed: Face operation sometimes cutting into corners when it shouldn’t
Changed: Thread mill operation no longer changes min hole size and max hole size when you select a tool.
Changed: Drill operation no longer changes min hole size and max hole size when you select a plasma tool.
Fixed: A few translation issues
Changed: You need to hover your mouse over the warning icon to see warnings.
Added: 'move to save Z' and other options to code snippets.
Changed: Code snippets are now output after the operations first positioning move
Fixed: A few operation window layout issues

V6.1.71

Fixed: Arc matching not working a lot of the time
Added: PlasmaTool plugin
Added: Overcut corners option for jet operations

V6.1.70

Fixed: Arc matching sometimes turning straight lines into arcs.

V6.1.69

More tool name fixes
Linux version now includes icons to replace icons missing in some Linux distros.
More rugged ini file backup to try to fix corrupted ini files on some computers

V6.1.68

Fixed: Auto generated tool names missing the tool number.

V6.1.67

Added: Plasma tools have the option to define the leadin/leadout settings.
Changed: Improved leadins on corners when using a negative overcut value
Changed: Improved time estimate for plasma cutting report
Fixed: Tabs not being copied when you copy operations
Fixed: 'One layer' plugin only worked on the first part.
Fixed: Shape plugin can now handle different languages
Fixed: Occasional incorrect tool paths for leadins/leadouts on 90 degree corners.
Changed: Tool naming is now more intelligent. The dreaded 'Automatically generate name' option is no more!
Fixed: Layout issues in the rotary tool dialog.
Fixed: Part files not saving any selected rules

V6.1.65

Fixed: Tab options box showing some uptions disabled when it shouldn’t.
Added: Job report includes custom tool and operation parameters.
Added: 'Exclude corner arcs' option to OnArc path rule
Fixed: laser/plasma simulator not showing piercing correctly on open contours
Fixed: OnOffsetLeft and OnOffsetRight post processor events not working correctly when some path rules are applied.

V6.1.64

Fixed: Override overcut on start point not always generating the correct leadin/leadout
Added: Ignore overlapping line detection for very complex drawings
Fixed: DXF and SVG splines resulting in too many line segments and very slow loading.
Fixed: Mach SheetCamRemote DLL not loading

V6.1.63

Fixed: Overcut corners not working

V6.1.62

Fixed: Jobs loaded from the command line end up untitled
Fixed: Occasional incorrect tool paths when ramping open contours
Fixed: Tabs mode occasionally getting disabled when it shouldn’t be.
Fixed: Start point properties for contour/pocket operations showing overcut options.
Fixed: CSV import not importing custom tool parameters.

V6.1.61

Added: Option to override overcut length per start point.
Fixed: Not cutting lead outs when using overcut.
Fixed: CSV import not working for some values
Fixed: Crashing when opening jobs with drill operations
Fixed: Not opening UTF-8 encoded CSV files with 'byte order mark' at the start of the file

V6.1.60

Fixed: Tool table not displaying correctly
Fixed: Support files not uploading correctly
Fixed: Shape files missing

V6.1.59

Fixed: Auto generated outlines having detail reduction and arc matching applied
Added: Start points are now automatically moved to optimize cutting
Added: Option to import/export tools as CSV
Added: Job files can optionally use the '.scjob' file extension
Fixed: Possible crash/security issue when plugins log debug messages
Added: Excellon now handles G1,G2,G3,G5,G90,G91
Fixed: Occasionally missing out code snippets when using chaining.
Fixed: Lua debugger not always stopping on breakpoints in plugins
Fixed: Plugins such as the shape plugin causing the rotary plugin’s graphics to be drawn in the wrong place.

V6.1.58

Numerous Linux fixes
Fixed: Occasional crash when moving contours between layers
Fixed: Occasionally missing out code snippets when using chaining.
Fixed: DXF splines sometimes importing incorrectly
Fixed: DXF occasionally reflecting outlines
Added: Excellon now handles incremental format files
Added: Option to ramp in to tabs as well as out

V6.1.54

Fixed: Rotary plugin using incorrect scaling when outputting templates in inch mode

V6.1.53

Fixed: Arc matching still causing lots of toolpath generation problems.
Added: Single click on a warning or error will keep the screen zoomed to the error.

V6.1.52

Fixed: Arc matching causing lots of toolpath generation problems.

V6.1.51

Fixed: thread mill operation generating incorrect tool paths when the tool diameter is close to the hole diameter
Fixed: Arc matching sometimes leaving line segments unmatched

V6.1.50

Fixed: Crashing if you press a key when using quick cut sequence

V6.1.49

Fixed: Auto backup not working correctly on Windows
Fixed: Leadins/leadouts not working on mirrored parts
Added: Manual setting of part cutting order in nesting mode (Right-click->Set part order)

V6.1.46

Fixed: Rotary plugin incorrectly reporting that a custom profile does not exist

V6.1.45

Fixed: Rotary plugin crashing when you select a custom profile
Added: Tool offset on knife tool
Fixed: Takes a very long time to select parts if the job has hundreds of parts
Fixed: Numerous settings issues in Linux version
Fixed: V tool offsets not getting regenerated if you change cut depth
Fixed: Fixed several layout issues with dialogs that have changing content.
Fixed: Loop corners threshold slider too small to work in Linux
Added: Missing Italian translation
Fixed: Overcut corners should not be applied on zigzag pocket paths
Fixed: Sometimes cutting inside when it should cut outside and vice-versa in very rare cases
Removed: „Cut start is above rapid clearance plane” warning as it is no longer needed
Changed: Path rules dialog is now resizeable
Added: „Cut around periphery” option to laser plugin
Fixed: Linux version not accepting command line switches

V6.1.39
Fixed: Numerous OpenGl issues in Linux

V6.1.38

Fixed: Jet operation 'Could not fit leadin on some outlines' warning not highlighting the problem leadins
Fixed: Excellon import sometimes creating too many operations
Fixed: Excellon import mistaking G93 as a hole coordinate
Fixed: Mach plugin not displaying coordinates correctly in inch mode
Fixed: SVG import positioning some outlines in the wrong place

V6.1.37

Added: Some warnings will now show where the problem is in your drawing. Hover your mouse over the warning and the offending part of your drawing will be shown. Roll your mouse wheel to zoom in/out.
Fixed: Pasted jet operations always have their 'start at the centre of circles' set to 1
Fixed: Copy/paste tools
Added: 'Copy all' to the operations panel right-click menu
Fixed: Rotary plugin optimizing rapids when it shouldn’t
Changed: Rotary plugin round features are now displayed more accurately
Fixed: Rotary plugin not always finishing straight cut lines correctly
Fixed: Wire plugin not allowing you to link more than 8 shapes
Fixed: Copy/paste in tool and operation tables

V6.1.36

Added: Operation table editor
Changed: Some minor changes to tool table editor
Fixed: Linux version crashing when tool table is closed
Fixed: Too many separator bars in tool + operation menus when using some plugins
Fixed: Path rules sometimes generating the wrong feed rate when the end of one rule meets the start of another rule
Added: Tool and operation panel toolbars can now be scrolled with the mouse wheel

V6.1.35

Fixed: circle detection sometimes failing on some shapes

V6.1.34

Fixed: Leadins sometimes being missed out when there is room for them.
Fixed: Occasional corrupted leadouts.
Added: nextTool variable in post processor. This contains the number of the next tool that will be used. Used for pre-selecting tool changers.

V6.1.33

Added 'Disable overcut' option to start point properties.
Changed: Registered SheetCam as the default editor for .camlic and .scpost files so now double clicking them will automatically install them in SheetCamn.
Fixed: Rough ellipses in SVG drawings
Fixed: Incorrect placement of groups in SVG drawings

V6.1.32

Fixed: Leadins on open paths creating incorrect tool paths
Fixed: Rotary plasma not always cutting around corners correctly if they have a very small radius
Changed: Rotary plasma I beam now only shows the four possible cut faces. It currently does not check for the torch hitting the flanges.
Fixed: On very rare occations the start and end of a circle can end up with slightly different coordinates in the post processor

V6.1.31

Fixed: Undercut not working if there is no leadout

V6.1.30

Added: The plasma operation now has an option to start the leadin on small circles at the centre of the circle.
Fixed: Arc recognition creating arcs in the wrong place if they are very nearly a circle.
Fixed: Knife plugin always realigning the knife to 90 degrees at the end of the cut if you use a leadin with no leadout
Changed: Knife plugin now does leadins at swivel depth
Changed: Lots of internal leadin/leadout changes in preparation for another try at G41/G42 support.
Changed: Layers names are now sorted alphabetically
Fixed: If plasma cutting starts on a tab the outline is sometimes cut multiple times
Fixed: 'Drives on' button in Eding CNC plugin not always working
Fixed: Gcode import ignored the scale factor in import options.
Fixed: Rotary plugin messing up badly on Ibeam profiles.

V6.1.29

Fixed: Rotary plugin 'create a dxf from marker files' created invalid dxf files
Fixed: Plugin debugger sometimes not stopping on breakpoints
Added: 'Disable hardware acceleration' in options->application options. This can be used to fix issues with some buggy graphics drivers
Fixed: Rulers sometimes going blank when they shouldn’t
Fixed: A number of issues with the Eding CNC plugin
Added: a couple of new bracket options in the shape plugin

V6.1.28

Fixed: Part outline not always being shown in nesting. May also solve crashing on close on some computers.
Fixed: Arc detection sometimes generating incorrect paths
Fixed: Job report ignoring feedrate reduction from path rules
Added: Option to add custom parking code
Changed: G-code import is now much more tolerant to inaccurately specified arcs
Fixed: Rotary plasma custom profiles generating incorrect code if the drawing is outside of the marker lines
Added: Rotary plasma now has an option to save the marker lines as a dxf file

V6.1.27

Changed: Pierce time is now calculated correctly in job report

V6.1.26

Added: Custom shapes for rotary plasma are now kept in a shape library rather than in the job.
Changed: The tab and action point editors are now a bit easier to use and appear in the right place. Pressing now always hides the editor.

V6.1.25

Changed: USBCNC plugin has now been deleted and replaced with Eding CNC plugin. It is compatible with Eding CNC V4.01 and V4.02
Added: If you are using alternative configs the config name is shown in the title bar
Fixed: If the post processor is missing it now does not default to the first in the list.
Added: When you select a layer in an operation editor, that layer is highlighted in your drawing.
Added: The Autoload plugin now has an option to check for sub directories
Added: The rotary plugin now allows you to use a drawing as a custom profile
Fixed: Some path rules not working correctly when you use loop corners.

V6.1.24

Fixed: Incorrect helper graphic for pocket operation stepover.
Fixed: Helper graphic sometimes disappearing in rotary tool definition dialog.
Changed: New machine types default to enabled (used to default to disabled)
Changed: Machine types now saved/loaded when you save/load machine settings.
Fixed: Arc detection sometimes inverting arcs.
Added 'Nesting' option to part window right-click menu – takes you directly to Options->job options->nesting.
Fixed: Tool window buttons moving down a small amount every time you change machine type

V6.1.23

Fixed: Not loading compiled lua plugins on XP
Fixed: Arc detection sometimes generating incorrect arcs
Fixed: Many small changes to get the linux version to build correctly

V6.1.22

Fixed(hopefully): manyposts plugin not working correctly

V6.1.21

Fixed: Arc detection sometimes creating invalid arcs.

V6.1.20

Fixed: Leadins did not shrink to fit small shapes

V6.1.19

Fixed: Arc detection sometime producing incorrect arcs

V6.1.18

Fixed: Rotary plugin locking up when you run the post processor on certain jobs.

V6.1.17

Fixed: Very slow auto backup which makes ShetCam appear to lock up for a while.
Changed: Improved arc detection
Changed: Rotary plugin now uses smaller steps on corners
Fixed: Vcarve plugin creating odd tool paths on open contours
Added: Material name is now used as the material file name
Fixed: Rotary plugin sometimes using the wrong rapid height

V6.1.16

Added: 'Always lift cutter when repositioning' option to zigzag cutting. This stops the occasional diagonal cuts when zigzag pocketing.
Fixed: Missing tool number in milling/routing tool definitions
Fixed: Clicking on an open line from a generated shape will not select that shape
Changed: Shape mode remembers the last shape selected when you switch to another mode.
Fixed: 'New job' didn’t clear the current shape if in shape mode.
Fixed: Locking up when loading some dxf files with splines.
Fixed: Saving material settings after changing some material parameters saved the repvious values
Fixed: Post breakpoints only working on edited posts
Fixed: Crash if you click the 'run post' button while debugging a post.

V6.1.15

Fixed: Rotary plasma outputting inaccurate coordinates on rectangular tube with a very small corner radius.
Fixed: Rotary plasma simulation not limiting feeds to the rapid feed rate
Fixed: Rotary plasma options always defaulting to 'flat sheet'
Changed: Rotary plasma now limits corner radius to a minimum of 0.1mm
Added: arcResolution setting to RotaryPlasma posts. This controls how smooth arcs are when cutting pipe or around corners
Fixed: Importing splines with sharp corners sometimes results in chamfered corners
Fixed: Debugger not showing the current line when debugging Lua scripts or posts
Fixed: Material name not being saved with the job
Fixed: Path rules not always using the correct feed if two rules have the same start or end point

V6.1.14

Fixed: Crashing on exit on some computers
Fixed: Hint icons being shown much too small.
Fixed: Save job and save job as icon swapped
Fixed: Sometimes not detecting arcs that have a very large radius and very small included angle
Fixed: Rotary plasma plungin sometimes rotating 360 degrees when it shouldn’t
Changed: Mode menus now show as radio buttons instead of check boxes
Added: Option to delete contours
Fixed: sometimes generating incorrect leadins
Fixed: Editor not always showing correctly when a Lua macro throws an error
Fixed: Some tools showing incorrect hint icons
Added: Material name (Options->job options->material)
Fixed: Arcs with a huge radius and small included angle are converted to lines
Added: 'Run post' button in post editor
Fixed: Overlapping rules sometimes not output correctly

V6.1.13

Fixed: Some plugins not loading
Fixed: shape plugin leaving graphics when you delete a part

V6.1.12

Added: Added lots of new icons
Changed: Can now select large,medium,small or classic icon set
Added: Shape cutting plugin. This will automatically generate drawings from a library of shapes.
Fixed: Occasionally not generating tool paths for open paths
Fixed: Very occasional random crash
Added: Load and save buttons in path rules
Changed: Vertical toolbars now automatically scroll if there isn’t enough room for the buttons

V6.1.11

Added: function post.SetEncoding to force g-code encoding
Added: I-beam support for rotary plasma
Changed: Measure now tries even harder to make sure the numbers are visible
Fixed: Hint icons for plugins such as RotaryPlasma stop working after you load a job file.
Fixed: Occasional crash when deleting an operation
Fixed: Check box in face operation not enabling/disabling layer and coordinate boxes.
Fixed: Tab mode remains disabled if you select a drilling/tapping operation then delete it
Fixed: Simulation not displaying all languages correctly
Fixed: Variable type in variable definitions not translating correctly
Fixed: Tabs not cutting correctly if they are under a start point and 'cleanup exit ramp' is turned off

V6.1.10

Fixed: Spindle speed missing from V carve operation
Fixed: Duplicated parts with V carve operations are not cut
Fixed: Path rule type names not translated

V6.1.9

Changed: Post documentation window is now non modal so it can be used at the same time as the post editor
Added: post editor has built in post documentation
Added: 'Convert selected files' to quick load plugin. This creates a series of job files containing the selected drawings
Fixed: In the rotary plugin sometimes the Z axis was too high
Added: Laser operation how has up/down scanning as well as left/right

V6.1.8

Fixed: Pipe plugin sometimes not cutting circles correctly
Added: DSTV (nc file) import
Fixed: time units not working where the system decimal is different from the selected language decimal.
Fixed: Path rules sometimes not resetting feed rate if multiple rules overlap
Fixed: Sometimes generating incorrect paths when using a ramped leadin
Fixed: Tools not remembering cusom options in some cases
Fixed: Start points on drill/tap operations not remembering manual cut order
Added: „Show notes when the job is opened” in Options->job options->notes
Fixed: Some plugins showing a „demo license has expired” message when they are correctly licensed

V6.1.7

Fixed: job report did not take pierce time into account
Fixed: Debug log cound cause a rare crash
Fixed: Not remembering custom post options
Fixed: time units not working where the system decimal is different from the selected language decimal.
Fixed: sometimes getting inside/outside mixed up for some very specific shapes
Fixed: Zoom window not working
Fixed: Post editor not saving edited posts in application data
Fixed: 'on circle' path rule not working correctly
Fixed: Blocks in dxf files sometimes appearing in the wrong place
Fixed: Rotary plugin breaking Z moves into lots of short moves.
Changed: Rotary plugin now optimises angular moves to take the shortest path
Fixed: Not always using the system decimal point/comma
use drawing directory
Fixed: Occasional crash if you close SheetCam and a plugin mode is selected
Changed: Job options dialog now remember it’s size
Fixed: Very slow startup on some computers
Added: Default directories now allows you to use the last drawing directory

V6.1.6

Fixed: Corner looping doing strange things on very sharp corners
Added: Operation name includes finish allowance if finish allowance is used
Changed: Post editor can now also open lua files
Added: Knife operation now allows corner loops
Fixed: Rotary simulation showing incorrect tool movements
Fixed: Rotary post not referencing correctly

V6.1.5

Fixed: Action tabs not working.

V6.1.4

Fixed: Lua editor not opening files correctly when a Lua script throws an error
Fixed: Path rules sometimes not outputting a acrriage return at the end of the line
Changed: lots of changes for Linux compatibility
Fixed: Sometimes need to click twice on part check box to enable/disable the part
Changed: On start path rule text was ambiguous
Fixed: Multiple duplicate would place a part if you click middle-mouse key or +left mouse key
Fixed: post editor tried saving to program files

V6.1.0 – V6.1.3 various changes to compile under Linux.

V6.0.1

Fixed: Perpendicular and tangent leadouts on open contours incorrect.
Fixed: A number of intermittent crashes
Fixed: Missing pipe wall thickness graphic

V6.0.0

Fixed: Arc leadin/leaouts sometimes not being generated when they should be.
Fixed: Editing a post causes the post processor to stop working or thow odd errors.
Fixed: Sim whowing incorrrect Z height when the post is set to 'top of table' or 'top of spoil board'
Added: Compression in text plugin
Added: In tab edit mode the delete key deletes tabs

Najnowsza wersja: 7.1.16 (Sierpień 2021)

Co się zmieniło?

Dodano: Włącz/wyłącz zablokowane części w oknie części.
Naprawiono: Sporadyczne awarie podczas zamykania.
Naprawiono: Leadins nie wyzwalają zdarzeń post OnOffset.

English Version:

Added: Enable/disable locked parts in part window.
Fixed: Occasional crash when closing.
Fixed: Leadins do not trigger OnOffset post events.

Wcześniejsze wersje:

7.1.15 (Lipiec 2021)
Co się zmieniło?

Naprawiono: W polu wyboru trybu konturu można teraz wybrać kontury z duplikatu.
Naprawiono: Niektóre pola wprowadzania liczb ignorowały klawisze „i” .
Dodano: uwzględniaj niestandardowe opcje w raporcie o pracy
Naprawiono: Okno dialogowe wiercenia czasami pokazuje opcje wiercenia obrotowego, gdy wybrane jest narzędzie jet
Naprawiono: środkowy przycisk + kółko myszy obraca część w trybie zagnieżdżania
Naprawiono: brak przycisku „punkt na pozycji” w trybie „pojedynczego ruchu” w oknie ruchu.
Naprawiono: w oknie dialogowym „Wiele ruchów” brakowało nagłówków kolumn pokazujące tylko jedną kolumnę
Naprawiono: Zainstalowanie posta uszkadza znaki Unicode.
Naprawiono: Podświetlanie części nie działa w opcjach zadania->zagnieżdżanie, jeśli jesteś w trybie zagnieżdżania.
Dodano: opcję skali części. Zajrzyj do menu prawego przycisku myszy w zagnieżdżaniu lub w drzewie części.
Dodano: Obliczanie czasu pracy na dole ekranu
Naprawiono: wyskakujące okienko ostrzeżeń operacji pokazujące zbyt wiele wiadomości
Zmieniono: Okno dialogowe raportu o zadaniu zapamiętuje teraz swoją pozycję i rozmiar

Eng:

Fixed: In contour mode box select allowed you to select contours from a duplicate.
Fixed: Some number input boxes ignored the and keys.
Added: post custom options to job report
Fixed: Drill dialog sometimes showing rotary drilling options when a jet tool is selected
Fixed: Centre button + mouse wheel rotates a part in nesting mode
Fixed: 'point at position' button missing in 'single move' mode in the move dialog.
Fixed: Move dialog 'Multiple move' mode missing column headers and only showing one column
Fixed: Install post corrupts Unicode characters.
Fixed: Part highlighting does not work in job options->nesting if you are in nesting mode.
Added: Part scale option. Look in nesting right-click menu or part tree right-click menu.
Added: Job time calculation at the bottom of the screen
Fixed: Operation warnings popup showing too many messages
Changed: Job report dialog now remembers it’s position and size

V7.1.14 (Maj 2021)
Co się zmieniło?
Naprawiono generowanie ścieżek narzędzia
Eng: Fixed: Not generating toolpaths correctly – oops!
V7.1.13 (Maj 2021)
Fixed: Part name not updating when you import a drawing
Fixed: Plasma should start at the end of the tab if the start point is on a tab
Fixed: Crash if minimum segments for arc fitting is less than 4
Added: Tool definitions now have path rules.
Fixed: Some windows, such as quick cut sequence not remembering their position
Fixed: Sim ramping down to cut height on the first cut if 'No move to safe z after tool change' is selected
Added: Shape now has 'Add to new part' option
Fixed: Entering coordinates in text plugin has odd effects
Fixed: Shape not updating the display if you enter a position coordinate
V7.1.12 (Kwiecień 2021)
Changed: Some changes to try to work around the green stripes issue on some computers.
Fixed: Entering text coordinates in text plugin did not work
Fixed: Hint icon popup missing on shape plugin
Fixed: Shape plugin missing X,Y coordinates
Fixed: Error generating tool paths when ramping out of a tab that is very close to the end of the cut path
Fixed: DNC tool not automatically sending data (actually fixed this time!)
Added: Depth per pass in V carving plugin
Fixed: Path rule sets don’t always stay deleted when you delete multiple rule sets
Added: Path rules for many tool types
V7.1.11 (Kwiecień 2021)
Fixed: Incorrect parking toolpath when using rotary plugin for milling on a flat sheet
Fixed: Missing coolant option in drilling operation
Fixed: Random crashing (at least one of the crashing bugs anyway)
Changed: SVG now has an option for 90DPI or 96DPI
Fixed: Changes in tab width not affecting already placed tabs
Fixed: random warning that you will disable start point optimisation in start point mode
Fixed: Many stability fixes to start point options in pinned mode
Archiwum
V7.1.10

Fixed: 'Reverse cut direction' in start point right-click menu can put leadin on wrong side or affect other cut paths.
Fixed: SVG showing hidden lines
Fixed: SVG scaling at 90DPI instead of 96DPI
Fixed: Creating a new part leaves the old part selected
Fixed: DNC tool not automatically sending data

V7.1.9

Fixed: In Edit contour 'move to part' does not work
Fixed: A few more translation issues
Fixed: More arc matching problems

V7.1.8

Fixed: Occasional crashing on loading a drawing when in start point or action tab mode
Fixed: Corner sharpening in pocketing missing some corners
Fixed: Ugly background on some of the sliders

V7.1.7

Fixed: Sometimes locking up on close.
Fixed: Input boxes do not allow you to set the caret using the mouse

V7.1.6

Fixed: Names from menus such as move to layer end up in shortcut keys.
Changed: move to layer etc added to shortcut keys. These pop up a sub menu with the layer/part selections.
Fixed: Loading a part can leave other parts selected
Changed: Sliders such as corner threshold now show the value
Fixed: Arc matching making huge circles (hopefuly I actually got it this time)
Changed: Better circle detection when arc matching.
Changed: Improved hint image popup so it tries not to cover other controls
Fixed: Input boxes not selecting when you click on them
Added: Set part position option to nesting (sets focus to part position X box)
Fixed: Shape plugin missing translation in dropdown boxes

V7.1.5

Added: Drawing date to part properties
Added: Popup help images instead of a fixed position image.
Changed: Manually edited names are now auto detected in older tool files.
Fixed: Occasional erroneous large circles when arc matching.
Changed: SVG now supports CSS (Corel SVG files use CSS)
Fixed: Quick load plugin selecting the wrong parts
Fixed: Shape names missing from translation

V7.1.4

Fixed: Tool tables losing custom names

V7.1.3

Fixed: Operation names not showing tool number
Fixed: Operations from older jobs not updating their names

V7.1.2

Fixed: Crash after opening operation table from operation right-click menu
Fixed: Right-click menus not being translated
Fixed: Missing wx translation files
Fixed: Machine and work not displaying when SheetCam is started
Changed: If you cancel adding a rule set, the first rule set is shown rather than disabling the rule list.
Fixed: Grid colour selector always defaulting to black instead of your selected colour
Added: In nesting + mouse wheel will rotate the part

V7.1.1

Fixed: Rotary plugin options not laying out correctly

V7.1.0

Changed: When loading older tool sets you are now asked if you want to keep the tool names
Fixed: Update dialog not sizing correctly
Fixed: Peripheral feed arte rule generating incorrect feed rates.
Removed: Depth of cut in peripheral feed rate rule
Fixed: Editing rules could cause a crash if you cycle between different rules very quickly.

V6.9.28

Fixed: Incorrect tool paths if you move/copy a contour to/from a part with both X and Y mirrored.
Fixed: Peripheral feed rate generating incorrect feed rates for inside arcs.
Fixed: Path rules dialog not highlighting selected rule
Fixed: Path rule dialog allows you to select a blank rule.
Changed: Part tree selection now allows shift-select and ctrl-select

V6.9.27

Fixed: Tools list scrolling horizontally instead of vertically
Fixed: Layout problems in some windows for example plate marker tool.
Fixed: Plate marker tool showing leadin/leadout options.
Fixed: GCode operation not saving/loading code snippets correctly.
Fixed: Help buttons not working
Fixed: Help appearing under main window
Fixed: Many operation and tool dialogs missing their help buttons

V6.9.26

Fixed: G-code operation does not save the code snippet selection
Fixed: Operation table does not show
Changed: Updated OEM installer config
Fixed: Load default toolset and save default toolset icons swapped
Fixed: Tool and operation tables did not select the cell when you right-click

V6.9.25

Fixed: Check boxes missing when using Wine
Changed: Renamed a lot of fonts
Fixed: Occasional crash on close
Fixed: Incorrect cut distance reported
Changed: Plunge distance reported separately to cut distance
Fixed: Drill operation showing start depth, cut depth and peck depth when using plasma tool
Changed: A large number of internal changes to shape plugin to try to prevent crashes.
Added: Text plugin now allows you to edit the text after placing it.
Changed: Code editor now shows the bottom sash properly. It also remembers it’s size.
Fixed: Wine detection sometimes incorrect
Fixed: SVG rectangle rounded corners not working if the Y radius is missing
Fixed: SHX fonts with arcs not showing correctly is compression is not 100%
Fixed: 'a backup has been found' Sometimes showing when it should not.
Added: Tabs mode now shows the number of contours with tabs. Useful to check if you have tabbed all contours.

V6.9.24

Fixed: Zigzag pocket could miss some areas on very complex geometry
Changed: More zigzag pocket speed optimisation
Fixed: Shapes are not editable after saving/loading the job.
Fixed: Shape hint bitmaps missing
Changed: shape 'Create bitmap' button is normally hidden. Enable it in Options->plugin options if needed.
Fixed: shape 'Create bitmap' button not always creating a valid bitmap.
Changed: Shape window now remembers it’s size
Added: Shape tree allows double click to select
Changed: You need to click 'Add to current part' to add the shape.
Changed: Quick load window now remembers it’s size
Added: New shapes (Thanks David)
Fixed: Operation names not updating if you change a tool name

V6.9.23

Fixed: Code snippets changing their names to 'Code, ERROR'
Fixed: Changing the tool name in the tools window does not always work.

V6.9.22

Fixed: Start points losing their index numbers when you load a job. Also causes crashing if you enter nesting mode.
Changed: The old zigzag pocket operation is now replaced with the new zigzag pocket algorithm. NOTE: Zigzag pocket2 operations now no longer work.
Fixed: Coolant randomly appearing in the wrong place in pocket operations when you change the type.

V6.9.21

Fixed: Displaying number of pierces even if you are not jet cutting.
Fixed: Path rules window does not expand correctly.
Fixed: Redundant 'Pocket' tab in operation table
Fixed: Operation table allows you to edit operation name
Changed: Tool names can be individually selected as auto named or manually named
Fixed: Drill operation shows layer and tool options twice if a jet tool is selected.
Fixed: Negative start point overcut overrides ignored if the operation’s overcut is zero or positive
Fixed: Copying contours from a mirrored part to a non mirrored part reverses the cut side.
Added: Operation names can be edited in the operations window and operation table.
Added: Tool names can be edited in the tools window.

V6.9.20

Fixed: Tool and operation tables not showing custom values.

V6.9.19

Fixed: Plasma operation editor using the wrong values.

V6.9.18

Fixed: Occasional layout issues in tool and operation dialogs.
Fixed: Tool names sometimes blank or with extra tool number.
Fixed: Tool table does not let you edit some values such as feed rate
Fixed: Tool/operation table missing a scroll bar
Fixed: Tool/Operation table sometimes showing edit boxes too small
Fixed: Tool paths sometimes not being generated correctly when ramping with tabs in a confined space.
Fixed: Move to layer sometimes causing a crash
Fixed: Post documentation window does not show.
Fixed: Laser plugin generating completely incorrect paths.
Changed: Path rules inside a wiggle pierce will be applied at the end of the pierce.

V6.9.17

Fixed: Unable to edit tool names.
Added: New zigzag pocketing algorithm 'Zigzag pocket 2′. Best suited to high step overs.
Fixed: Start point options popup interferes with quick cut sequence
Fixed: Start point options popup sometimes changes start point when you have the mouse over it.
Changed: Start point options can be pinned as a popup or if left unpinned operates as before.

V6.9.16

Fixed: Crashing when 'Automatically generate name' is selected in tool dialog after changing the tool type.
Fixed: DXF Z extrusion of a block should reflect it
Fixed: Crash if just a space is entered in a number box
Fixed: Occasional incorrect tool paths when ramping an open contour.
Changed: Start point options popup is now easier to use.
Removed: Start point properties dialog (use start point options popup instead).
Fixed: Very slow moving large groups of parts in nesting mode
Fixed: Print showing background as black instead of white
Fixed: 'Start at the centre of holes' option missing from plasma operation and start points
Fixed: Post processor dialog status window is too small

V6.9.15

Fixed: Copy/move outlines to another part could cause corrupted outlines.
Changed: Action points and start points now always show the point properties in a popup window.
Fixed: Some layout issues in tool and operation dialogs.
Fixed: Part window not showing lock icon correctly.
Fixed: DXF not reflecting blocks correctly when a negative Z scale is used
Fixed: Graphics in tool and operation dialogs too large and blurred.
Fixed: Hot tracking on operation window makes warning text unreadable.
Fixed: Occasional incorrect tool paths when ramping an open contour.
Fixed: Installer now installs .po translation files.

V6.9.14

Changed: Wire plugin now does not reverse direction of cut to get to exit point
Added: Drawing import options now allows you to enter a part position.
Added: Cut distance and part information in status box.
Changed: Improved OpenGL compatibility

V6.9.13

Fixed: SVG ignoring shapes
Fixed: OpenGl display not drawing correctly at startup on some computers
Added: Search in quick load plugin
Fixed: 'Include sub dirs' not working correctly if the sub directories contain files of the same name
Added: 'Cut length' in status box
Added: Ability to turn off cut preview in simulation options
Fixed: Large memory leak which could cause crashing on close

V6.9.12

Fixed: Operation panel not drawing correctly on startup.
Fixed: Machine and work not showing at startup

V6.9.11

Fixed: OpenGL display not showing (oops!)

V6.9.10

Fixed? Crashing on close
Fixed? Stripes on OpenGl

V6.9.9

Fixed: SVG not scaling correctly when a view box is specified

V6.9.8

Fixed: Several OpenGL errors which could be causing the green stripes seen by some. May also fix some crashing issues?
Fixed: Arc matching sometimes distorting arcs
Fixed: SVG distorting some drawings
Fixed: SVG locking up with some Corel SVG files
Fixed: Missing icons for SheetCam files
Fixed: New tool and new operation right-click menus not working.

V6.9.7

Fixed: Missing 'd' shortcut to duplicate in nesting
Fixed: Missing shortcuts for tools and operations
Fixed: Quickload throwing an error if you double click on a drawing name
Fixed: Right click on a toolbar bringing up the wrong options page
Fixed: Mach3 plugin missing
Fixed: Start point mode stops working if you select a different part
Fixed? Random crashing on close

V6.9.6

Changed: Action points now add their code snippet’s comments to the g-code file.
Fixed: Menus and tree not updating correctly when shortcut keys are changed.
Fixed: Crashing on close

V6.9.5

Comments in rule code snippets are now output in g-code
Edit contours now allows you to move/copy contours to other parts.
Added option for square corners when milling/routing contours (cut path tab).
Changed: Operations window is now available in nesting mode. It is only disabled if multiple parts are selected.

V6.9.4

Fixed SVG locking up when importing arcs.

V6.9.3

Fixed big icons in menus

V6.9.2

Added: Preview mode in simulation which shows the plasma cut parts.
Fixed a number of crashes

V6.9.1

Built using WX-3 and VS2019

V6.1.74

Fixed: Occasionally losing 'Automatically generate name' option when loading tool sets.

V6.1.73

Fixed: Manually entered tool names getting overwriten. 'Automatically generate name' is back!

V6.1.72

Fixed: Tabs disappearing when you edit an operation with tabs.
Fixed: Feed rate overrides not working correctly in job report
Fixed: Face operation sometimes cutting into corners when it shouldn’t
Changed: Thread mill operation no longer changes min hole size and max hole size when you select a tool.
Changed: Drill operation no longer changes min hole size and max hole size when you select a plasma tool.
Fixed: A few translation issues
Changed: You need to hover your mouse over the warning icon to see warnings.
Added: 'move to save Z' and other options to code snippets.
Changed: Code snippets are now output after the operations first positioning move
Fixed: A few operation window layout issues

V6.1.71

Fixed: Arc matching not working a lot of the time
Added: PlasmaTool plugin
Added: Overcut corners option for jet operations

V6.1.70

Fixed: Arc matching sometimes turning straight lines into arcs.

V6.1.69

More tool name fixes
Linux version now includes icons to replace icons missing in some Linux distros.
More rugged ini file backup to try to fix corrupted ini files on some computers

V6.1.68

Fixed: Auto generated tool names missing the tool number.

V6.1.67

Added: Plasma tools have the option to define the leadin/leadout settings.
Changed: Improved leadins on corners when using a negative overcut value
Changed: Improved time estimate for plasma cutting report
Fixed: Tabs not being copied when you copy operations
Fixed: 'One layer' plugin only worked on the first part.
Fixed: Shape plugin can now handle different languages
Fixed: Occasional incorrect tool paths for leadins/leadouts on 90 degree corners.
Changed: Tool naming is now more intelligent. The dreaded 'Automatically generate name' option is no more!
Fixed: Layout issues in the rotary tool dialog.
Fixed: Part files not saving any selected rules

V6.1.65

Fixed: Tab options box showing some uptions disabled when it shouldn’t.
Added: Job report includes custom tool and operation parameters.
Added: 'Exclude corner arcs' option to OnArc path rule
Fixed: laser/plasma simulator not showing piercing correctly on open contours
Fixed: OnOffsetLeft and OnOffsetRight post processor events not working correctly when some path rules are applied.

V6.1.64

Fixed: Override overcut on start point not always generating the correct leadin/leadout
Added: Ignore overlapping line detection for very complex drawings
Fixed: DXF and SVG splines resulting in too many line segments and very slow loading.
Fixed: Mach SheetCamRemote DLL not loading

V6.1.63

Fixed: Overcut corners not working

V6.1.62

Fixed: Jobs loaded from the command line end up untitled
Fixed: Occasional incorrect tool paths when ramping open contours
Fixed: Tabs mode occasionally getting disabled when it shouldn’t be.
Fixed: Start point properties for contour/pocket operations showing overcut options.
Fixed: CSV import not importing custom tool parameters.

V6.1.61

Added: Option to override overcut length per start point.
Fixed: Not cutting lead outs when using overcut.
Fixed: CSV import not working for some values
Fixed: Crashing when opening jobs with drill operations
Fixed: Not opening UTF-8 encoded CSV files with 'byte order mark' at the start of the file

V6.1.60

Fixed: Tool table not displaying correctly
Fixed: Support files not uploading correctly
Fixed: Shape files missing

V6.1.59

Fixed: Auto generated outlines having detail reduction and arc matching applied
Added: Start points are now automatically moved to optimize cutting
Added: Option to import/export tools as CSV
Added: Job files can optionally use the '.scjob' file extension
Fixed: Possible crash/security issue when plugins log debug messages
Added: Excellon now handles G1,G2,G3,G5,G90,G91
Fixed: Occasionally missing out code snippets when using chaining.
Fixed: Lua debugger not always stopping on breakpoints in plugins
Fixed: Plugins such as the shape plugin causing the rotary plugin’s graphics to be drawn in the wrong place.

V6.1.58

Numerous Linux fixes
Fixed: Occasional crash when moving contours between layers
Fixed: Occasionally missing out code snippets when using chaining.
Fixed: DXF splines sometimes importing incorrectly
Fixed: DXF occasionally reflecting outlines
Added: Excellon now handles incremental format files
Added: Option to ramp in to tabs as well as out

V6.1.54

Fixed: Rotary plugin using incorrect scaling when outputting templates in inch mode

V6.1.53

Fixed: Arc matching still causing lots of toolpath generation problems.
Added: Single click on a warning or error will keep the screen zoomed to the error.

V6.1.52

Fixed: Arc matching causing lots of toolpath generation problems.

V6.1.51

Fixed: thread mill operation generating incorrect tool paths when the tool diameter is close to the hole diameter
Fixed: Arc matching sometimes leaving line segments unmatched

V6.1.50

Fixed: Crashing if you press a key when using quick cut sequence

V6.1.49

Fixed: Auto backup not working correctly on Windows
Fixed: Leadins/leadouts not working on mirrored parts
Added: Manual setting of part cutting order in nesting mode (Right-click->Set part order)

V6.1.46

Fixed: Rotary plugin incorrectly reporting that a custom profile does not exist

V6.1.45

Fixed: Rotary plugin crashing when you select a custom profile
Added: Tool offset on knife tool
Fixed: Takes a very long time to select parts if the job has hundreds of parts
Fixed: Numerous settings issues in Linux version
Fixed: V tool offsets not getting regenerated if you change cut depth
Fixed: Fixed several layout issues with dialogs that have changing content.
Fixed: Loop corners threshold slider too small to work in Linux
Added: Missing Italian translation
Fixed: Overcut corners should not be applied on zigzag pocket paths
Fixed: Sometimes cutting inside when it should cut outside and vice-versa in very rare cases
Removed: „Cut start is above rapid clearance plane” warning as it is no longer needed
Changed: Path rules dialog is now resizeable
Added: „Cut around periphery” option to laser plugin
Fixed: Linux version not accepting command line switches

V6.1.39
Fixed: Numerous OpenGl issues in Linux

V6.1.38

Fixed: Jet operation 'Could not fit leadin on some outlines' warning not highlighting the problem leadins
Fixed: Excellon import sometimes creating too many operations
Fixed: Excellon import mistaking G93 as a hole coordinate
Fixed: Mach plugin not displaying coordinates correctly in inch mode
Fixed: SVG import positioning some outlines in the wrong place

V6.1.37

Added: Some warnings will now show where the problem is in your drawing. Hover your mouse over the warning and the offending part of your drawing will be shown. Roll your mouse wheel to zoom in/out.
Fixed: Pasted jet operations always have their 'start at the centre of circles' set to 1
Fixed: Copy/paste tools
Added: 'Copy all' to the operations panel right-click menu
Fixed: Rotary plugin optimizing rapids when it shouldn’t
Changed: Rotary plugin round features are now displayed more accurately
Fixed: Rotary plugin not always finishing straight cut lines correctly
Fixed: Wire plugin not allowing you to link more than 8 shapes
Fixed: Copy/paste in tool and operation tables

V6.1.36

Added: Operation table editor
Changed: Some minor changes to tool table editor
Fixed: Linux version crashing when tool table is closed
Fixed: Too many separator bars in tool + operation menus when using some plugins
Fixed: Path rules sometimes generating the wrong feed rate when the end of one rule meets the start of another rule
Added: Tool and operation panel toolbars can now be scrolled with the mouse wheel

V6.1.35

Fixed: circle detection sometimes failing on some shapes

V6.1.34

Fixed: Leadins sometimes being missed out when there is room for them.
Fixed: Occasional corrupted leadouts.
Added: nextTool variable in post processor. This contains the number of the next tool that will be used. Used for pre-selecting tool changers.

V6.1.33

Added 'Disable overcut' option to start point properties.
Changed: Registered SheetCam as the default editor for .camlic and .scpost files so now double clicking them will automatically install them in SheetCamn.
Fixed: Rough ellipses in SVG drawings
Fixed: Incorrect placement of groups in SVG drawings

V6.1.32

Fixed: Leadins on open paths creating incorrect tool paths
Fixed: Rotary plasma not always cutting around corners correctly if they have a very small radius
Changed: Rotary plasma I beam now only shows the four possible cut faces. It currently does not check for the torch hitting the flanges.
Fixed: On very rare occations the start and end of a circle can end up with slightly different coordinates in the post processor

V6.1.31

Fixed: Undercut not working if there is no leadout

V6.1.30

Added: The plasma operation now has an option to start the leadin on small circles at the centre of the circle.
Fixed: Arc recognition creating arcs in the wrong place if they are very nearly a circle.
Fixed: Knife plugin always realigning the knife to 90 degrees at the end of the cut if you use a leadin with no leadout
Changed: Knife plugin now does leadins at swivel depth
Changed: Lots of internal leadin/leadout changes in preparation for another try at G41/G42 support.
Changed: Layers names are now sorted alphabetically
Fixed: If plasma cutting starts on a tab the outline is sometimes cut multiple times
Fixed: 'Drives on' button in Eding CNC plugin not always working
Fixed: Gcode import ignored the scale factor in import options.
Fixed: Rotary plugin messing up badly on Ibeam profiles.

V6.1.29

Fixed: Rotary plugin 'create a dxf from marker files' created invalid dxf files
Fixed: Plugin debugger sometimes not stopping on breakpoints
Added: 'Disable hardware acceleration' in options->application options. This can be used to fix issues with some buggy graphics drivers
Fixed: Rulers sometimes going blank when they shouldn’t
Fixed: A number of issues with the Eding CNC plugin
Added: a couple of new bracket options in the shape plugin

V6.1.28

Fixed: Part outline not always being shown in nesting. May also solve crashing on close on some computers.
Fixed: Arc detection sometimes generating incorrect paths
Fixed: Job report ignoring feedrate reduction from path rules
Added: Option to add custom parking code
Changed: G-code import is now much more tolerant to inaccurately specified arcs
Fixed: Rotary plasma custom profiles generating incorrect code if the drawing is outside of the marker lines
Added: Rotary plasma now has an option to save the marker lines as a dxf file

V6.1.27

Changed: Pierce time is now calculated correctly in job report

V6.1.26

Added: Custom shapes for rotary plasma are now kept in a shape library rather than in the job.
Changed: The tab and action point editors are now a bit easier to use and appear in the right place. Pressing now always hides the editor.

V6.1.25

Changed: USBCNC plugin has now been deleted and replaced with Eding CNC plugin. It is compatible with Eding CNC V4.01 and V4.02
Added: If you are using alternative configs the config name is shown in the title bar
Fixed: If the post processor is missing it now does not default to the first in the list.
Added: When you select a layer in an operation editor, that layer is highlighted in your drawing.
Added: The Autoload plugin now has an option to check for sub directories
Added: The rotary plugin now allows you to use a drawing as a custom profile
Fixed: Some path rules not working correctly when you use loop corners.

V6.1.24

Fixed: Incorrect helper graphic for pocket operation stepover.
Fixed: Helper graphic sometimes disappearing in rotary tool definition dialog.
Changed: New machine types default to enabled (used to default to disabled)
Changed: Machine types now saved/loaded when you save/load machine settings.
Fixed: Arc detection sometimes inverting arcs.
Added 'Nesting' option to part window right-click menu – takes you directly to Options->job options->nesting.
Fixed: Tool window buttons moving down a small amount every time you change machine type

V6.1.23

Fixed: Not loading compiled lua plugins on XP
Fixed: Arc detection sometimes generating incorrect arcs
Fixed: Many small changes to get the linux version to build correctly

V6.1.22

Fixed(hopefully): manyposts plugin not working correctly

V6.1.21

Fixed: Arc detection sometimes creating invalid arcs.

V6.1.20

Fixed: Leadins did not shrink to fit small shapes

V6.1.19

Fixed: Arc detection sometime producing incorrect arcs

V6.1.18

Fixed: Rotary plugin locking up when you run the post processor on certain jobs.

V6.1.17

Fixed: Very slow auto backup which makes ShetCam appear to lock up for a while.
Changed: Improved arc detection
Changed: Rotary plugin now uses smaller steps on corners
Fixed: Vcarve plugin creating odd tool paths on open contours
Added: Material name is now used as the material file name
Fixed: Rotary plugin sometimes using the wrong rapid height

V6.1.16

Added: 'Always lift cutter when repositioning' option to zigzag cutting. This stops the occasional diagonal cuts when zigzag pocketing.
Fixed: Missing tool number in milling/routing tool definitions
Fixed: Clicking on an open line from a generated shape will not select that shape
Changed: Shape mode remembers the last shape selected when you switch to another mode.
Fixed: 'New job' didn’t clear the current shape if in shape mode.
Fixed: Locking up when loading some dxf files with splines.
Fixed: Saving material settings after changing some material parameters saved the repvious values
Fixed: Post breakpoints only working on edited posts
Fixed: Crash if you click the 'run post' button while debugging a post.

V6.1.15

Fixed: Rotary plasma outputting inaccurate coordinates on rectangular tube with a very small corner radius.
Fixed: Rotary plasma simulation not limiting feeds to the rapid feed rate
Fixed: Rotary plasma options always defaulting to 'flat sheet'
Changed: Rotary plasma now limits corner radius to a minimum of 0.1mm
Added: arcResolution setting to RotaryPlasma posts. This controls how smooth arcs are when cutting pipe or around corners
Fixed: Importing splines with sharp corners sometimes results in chamfered corners
Fixed: Debugger not showing the current line when debugging Lua scripts or posts
Fixed: Material name not being saved with the job
Fixed: Path rules not always using the correct feed if two rules have the same start or end point

V6.1.14

Fixed: Crashing on exit on some computers
Fixed: Hint icons being shown much too small.
Fixed: Save job and save job as icon swapped
Fixed: Sometimes not detecting arcs that have a very large radius and very small included angle
Fixed: Rotary plasma plungin sometimes rotating 360 degrees when it shouldn’t
Changed: Mode menus now show as radio buttons instead of check boxes
Added: Option to delete contours
Fixed: sometimes generating incorrect leadins
Fixed: Editor not always showing correctly when a Lua macro throws an error
Fixed: Some tools showing incorrect hint icons
Added: Material name (Options->job options->material)
Fixed: Arcs with a huge radius and small included angle are converted to lines
Added: 'Run post' button in post editor
Fixed: Overlapping rules sometimes not output correctly

V6.1.13

Fixed: Some plugins not loading
Fixed: shape plugin leaving graphics when you delete a part

V6.1.12

Added: Added lots of new icons
Changed: Can now select large,medium,small or classic icon set
Added: Shape cutting plugin. This will automatically generate drawings from a library of shapes.
Fixed: Occasionally not generating tool paths for open paths
Fixed: Very occasional random crash
Added: Load and save buttons in path rules
Changed: Vertical toolbars now automatically scroll if there isn’t enough room for the buttons

V6.1.11

Added: function post.SetEncoding to force g-code encoding
Added: I-beam support for rotary plasma
Changed: Measure now tries even harder to make sure the numbers are visible
Fixed: Hint icons for plugins such as RotaryPlasma stop working after you load a job file.
Fixed: Occasional crash when deleting an operation
Fixed: Check box in face operation not enabling/disabling layer and coordinate boxes.
Fixed: Tab mode remains disabled if you select a drilling/tapping operation then delete it
Fixed: Simulation not displaying all languages correctly
Fixed: Variable type in variable definitions not translating correctly
Fixed: Tabs not cutting correctly if they are under a start point and 'cleanup exit ramp' is turned off

V6.1.10

Fixed: Spindle speed missing from V carve operation
Fixed: Duplicated parts with V carve operations are not cut
Fixed: Path rule type names not translated

V6.1.9

Changed: Post documentation window is now non modal so it can be used at the same time as the post editor
Added: post editor has built in post documentation
Added: 'Convert selected files' to quick load plugin. This creates a series of job files containing the selected drawings
Fixed: In the rotary plugin sometimes the Z axis was too high
Added: Laser operation how has up/down scanning as well as left/right

V6.1.8

Fixed: Pipe plugin sometimes not cutting circles correctly
Added: DSTV (nc file) import
Fixed: time units not working where the system decimal is different from the selected language decimal.
Fixed: Path rules sometimes not resetting feed rate if multiple rules overlap
Fixed: Sometimes generating incorrect paths when using a ramped leadin
Fixed: Tools not remembering cusom options in some cases
Fixed: Start points on drill/tap operations not remembering manual cut order
Added: „Show notes when the job is opened” in Options->job options->notes
Fixed: Some plugins showing a „demo license has expired” message when they are correctly licensed

V6.1.7

Fixed: job report did not take pierce time into account
Fixed: Debug log cound cause a rare crash
Fixed: Not remembering custom post options
Fixed: time units not working where the system decimal is different from the selected language decimal.
Fixed: sometimes getting inside/outside mixed up for some very specific shapes
Fixed: Zoom window not working
Fixed: Post editor not saving edited posts in application data
Fixed: 'on circle' path rule not working correctly
Fixed: Blocks in dxf files sometimes appearing in the wrong place
Fixed: Rotary plugin breaking Z moves into lots of short moves.
Changed: Rotary plugin now optimises angular moves to take the shortest path
Fixed: Not always using the system decimal point/comma
use drawing directory
Fixed: Occasional crash if you close SheetCam and a plugin mode is selected
Changed: Job options dialog now remember it’s size
Fixed: Very slow startup on some computers
Added: Default directories now allows you to use the last drawing directory

V6.1.6

Fixed: Corner looping doing strange things on very sharp corners
Added: Operation name includes finish allowance if finish allowance is used
Changed: Post editor can now also open lua files
Added: Knife operation now allows corner loops
Fixed: Rotary simulation showing incorrect tool movements
Fixed: Rotary post not referencing correctly

V6.1.5

Fixed: Action tabs not working.

V6.1.4

Fixed: Lua editor not opening files correctly when a Lua script throws an error
Fixed: Path rules sometimes not outputting a acrriage return at the end of the line
Changed: lots of changes for Linux compatibility
Fixed: Sometimes need to click twice on part check box to enable/disable the part
Changed: On start path rule text was ambiguous
Fixed: Multiple duplicate would place a part if you click middle-mouse key or +left mouse key
Fixed: post editor tried saving to program files

V6.1.0 – V6.1.3 various changes to compile under Linux.

V6.0.1

Fixed: Perpendicular and tangent leadouts on open contours incorrect.
Fixed: A number of intermittent crashes
Fixed: Missing pipe wall thickness graphic

V6.0.0

Fixed: Arc leadin/leaouts sometimes not being generated when they should be.
Fixed: Editing a post causes the post processor to stop working or thow odd errors.
Fixed: Sim whowing incorrrect Z height when the post is set to 'top of table' or 'top of spoil board'
Added: Compression in text plugin
Added: In tab edit mode the delete key deletes tabs